Long working life: the common filament lamp, daylight lamps, energy-saving lamps and other gas-discharge lamps have the wire or electrode. However the sputtering effect of the wire of electrode is an inevitable component limiting the life of lamp. As the low-frequency induction lamps have no electrode and work on the electromagnetic principle and the fluorescence discharge principle. Therefore, there is no inevitable component limiting the life of lamps. Normally, these lamps can work for 50000-100000hours.

Energy saving: compared with the filament lamps, the induction lamps can save more than 80% energy, and the luminous flux of a 85w high-frequency induction lamp is almost same with that of a 450w filament lamp.

Environment friendly: as the induction lamps use the solid amalgam, it will not cause any pollution to the environment even they become broken. The rate of recycle can reach more than 99%. As a result, it is a real environment-friendly light source which can reduce the gas emission.

High efficiency: over 80LM/W on average.

No flash: as they work on a low frequency, it can be considered without the flash effect, so it will not make your eyes feel exhaust and can protect your eyes.

Good color rendering: the color rendering index is greater than 80, providing gentle light and showing the natural gloss of the objects

Color temperatures selectable: customers can select the color temperature ranging from 2700k to 6400k, and the color bulb can be made to use for garden decoration.

Low luminous decay: the luminous flux for 60000 hours can be maintained at no less than 70%

No need to warm up: the lamp can be started and restarted at once, and will not cause the wire sputtering effect normally caused by the common electrode discharge lamps.

Sound electrical performance: this kind of lamp works on IC chips and wide-voltage design, providing a low power factor, low current harmonic and adjustable light